- TOP
- Applications
- From normal paint to ROVAL
Remove all the rust and old paint film with a power tool.
Expose the clean steel surface.
Agitate sufficiently to obtain uniform density with a powered agitator.
Apply ROVAL and do not spread too thinly.
After 20-30 minutes curing time, apply second coat on the dry surface.
（Low temperature prolongs curing time.）
After fully cured, measure the dry film thickness.
After application
Remove old paint film, and expose clean steel surface.
Even if the film of paint or other anti-corrosion paint exists, remove it with power tools or separating chemicals.
